English
  • 8/30 Moo.4

  • Tha Mai , Krathum Baen,Samut sakhon,74110

  • 08.00-18.00

  • Monday to Friday

Nov 05, 2026

A project boundary fence does not come in only one type, and choosing the wrong type at the start drives up both repair costs and installation labour later. This article compares the three fence types most used on construction sites, in factories and on farms, explains which job suits which type, and lists the questions you must be able to answer before ordering.

Why the wrong fence type makes costs spiral

Most boundary fences do not fail because the steel is weak, but because the type does not match the job for example, a fence that needs a perfectly straight line fitted on sloping ground, or a tight mesh used where there is almost no wind load, while a wide mesh is used where the fence takes the full wind.

The result at first looks like a saving, but after one rainy season the posts start to lean, the panels start to sag, and reinforcement becomes necessary later, which is many times more expensive than choosing the right type from the start.

The three fence types most used for boundary work

1. Wave fence panel (Wave)

A welded wire panel rolled with horizontal corrugations. The corrugation acts like a stiffening frame for the panel without increasing the wire size. Its strengths are a neat appearance and straight post lines because it is installed as a ready-made panel fixed to square or round posts

It suits work that needs a consistent line, such as a project boundary, a factory, or a site where the owner wants the overall look to be orderly. The trade-off is that on very steep ground, stepping the posts is more awkward than with other types

2. Hinge joint mesh fence (Hinge joint)

A knuckled hinge joint mesh whose wires can still twist when it takes an impact. It is the type with the best value price per metre and fast installation, suited to long boundary lines such as agricultural land, livestock farms or animal barriers

What you must watch is the tension of the line. If the mesh is not tensioned enough or the post spacing is too wide, the mesh surface sags into waves after a while, and correcting that later is harder than doing it right from the start

3. Diamond mesh fence (Chain link)

A diamond pattern woven mesh with high flexibility that adapts well to the shape of the site, so it is popular for sports grounds, court enclosures and factory boundaries that need a long continuous run with few posts

One thing to know is that chain link needs tensioning hardware (tension wire and fittings) installed the right way. Without that, the fence looks finished but starts to sag from the first month

Comparison table: which type of work should use which fence

Type of work Suitable type Reason
Project boundary that needs a neat look and straight post lines Wave fence panel A ready-made panel, so spacing and levels are easy to control
Agricultural land, farms, long boundaries where price per metre matters Hinge joint mesh fence Low cost per metre, fast to install
Sports grounds, areas that need flexibility and long post spans Diamond mesh fence Flexible to the shape of the site and takes impact well
Boundary on an existing wall or structure Ready-made panel + base plate Fixes to the existing structure and reduces demolition or drilling
Sloping ground or hillside Hinge joint mesh / chain link Easier to follow ground levels than a rigid panel

5 questions you must be able to answer before ordering a fence

  1. What do you need to block — people, animals or vehicles. For animals, look at their behaviour and body size too, not only the fence height
  2. How steep is the site — a line with a big difference in level changes both the fence type and the whole method of stepping the posts
  3. Wind load at the site — open ground beside water or on the coast needs tighter post spacing and stronger fixings than usual
  4. How many years must it last, and is it near the sea — distance from the sea has a direct effect on the thickness of the anti-rust coating
  5. Is there already a wall or an existing structure — if there is, the installation method and the price differ clearly from work where posts are driven into the ground

The mistakes we see most often on site

  • Choosing a fence on price per metre alone — cheap, but having to reinforce it later costs more
  • Not checking the level of the wall coping or the ground line before setting the posts — the last panel ends up higher or lower than the rest of the line
  • Using the same post spacing on every job — work in a windy spot needs tighter spacing than work in a sheltered area
  • Damaging the anti-rust coating during installation — weld marks or grinding in a visible spot are where rust will start first

Summary

No fence type is the best for every job. There is only the type that matches the character of the site and the way it is used most closely. If you start by answering the 5 questions above completely, choosing the type becomes much easier and there is less chance you will have to come back and fix it later

The Thai Fence Wiremesh team manufactures and installs fence panels, hinge joint mesh and diamond mesh, all three types — send us your site dimensions or the design you want and we can assess it straight away

Contact us for a quotation | Tel. 02-431-2468, 02-431-2469, 089-811-9636

Share this post :


widget